SINJEE is easy for you,Friendly,Trusted, SINJEE is committed to providing each customer with the highest standard of quality product and good service. And we are striving to keep developing our product list to bring you upgraded and optimized products! Follow Your Dreams, Smiles, Happy Everyday!
The SINJEE Dash Cam Hardwire Kit allows you to install your In Car Camera permanently into your vehicle. This Dash Cam hardwire kit is a simple “plug and play”solution to hardwire any MICRO USB CAR DASH CAMERA into your car and no longer require a car cigarette lighter socket. The box contains all the components required to easily connect the power supply directly to a fuse box of any vehicle that uses either standard ATO/C fuses OR smaller ATM fuses.which covers most vehicles. It can be installed in less than a minute. Nearly less electrical expertise required.Simply remove a fuse from the fuse box, plug the required fuse "tap" cable supplied in the kit in to the vehicles fuse box and plug the displaced fuse in to the top of the fuse tap cable. The car camera now has its own power supply and no longer requires connection to the car cigarette lighter socket. Now hide the included 3.5M 11FT car camera power cable, using your car interior trim, to the point of installation of your car dash cam.
This SINJEE Dash Camera HardWire kit can be used to power your Dash Camera in your car or truck, Sat Nav, Radar Detector in a non-obtrusive way just with Micro USB power input, without the need to have wires trailing all over your dash in order to plug a lead in to the cigar lighter socket.It connects the camera directly to the fuse box under the dashboard for continuous power from the vehicle’s battery. Your dash camera will always be powered, providing a watchful eye over your vehicle when you’ve left it unattended with the ignition turned off.It enables you to hide the power lead along to top of the windscreen and around the side of the pillar to under the dashboard. For 24-hour surveillance, hardwiring can’t be beat.
> Input Voltage :12-24V input
> Output Voltage: DC5V
> Output Current: 2A(Exactly)
> It compatible with any vehicle Car DVR with Micro USB socket.
> Perfect for 24H parking surveillance
> Keeps your car organized (Connects your dash cam to the car battery)
> Works with the best dash cams on the market
> Get 24 hours of battery life
> Protects your car battery from dying
> Doesn't permanently alter your car in any way Easily installs in any modern car
> Works with a number of portable electronics
> With low voltage protection function, protect car's battery,12V-11.2V(Cut Off Automatically),24V-23.2V(Cut Off Automatically)
> 1pcs 3.5M 11FT SINJEE Dash Cam Hardwire Kit- Micro USB
> 1pcs Fuse link cable for standard ATO/C fuses
> 1pcs 2Amp Fuse (Standard ATO/C)
> 1pcs English Instruction Manual
> 1pcs Anti-Interfere Magnetic Ring(Installed with cable)
> 1pcs Thanksgiving Card
Safety & Warnings:
> Ensure ignition is off before installing hardwire kit
> Check polarity and grounding is correct before confirming installation
> Avoid using a fuse connection for a safety critical circuit e.g. Airbag
> Not designed for installation to positive ground circuits
> Any modifications to the hardwire kit and supplied accessories will void the product after sales services rule.
> Failure to connect the product as stated in these instructions could result in damage and may result in discharge of the vehicle battery which will not be covered under the manufacturer’s after sales services.